Skip to main content
 FAQs

Steeples/Cupolas

What size steeple do we need for our building?

A good rule of thumb is for the steeple to be the same height as your building at the point where the steeple will be set, and for the base width to be 1/10th the width of your building.

What accessories are available to personalize our steeple/cupola?

Texas Clear Water Systems steeples and cupolas can be personalized to fit your needs with a variety of standard options, including lightning package, spire crosses, louvers, windows and applied moldings. Decorative railings and urns are also available to complete your steeple installation.

What if we don’t see what we want here?

Call us! In addition to our standard line, we specialize in custom fabrication. Fiberglass can be used in a surprising number of architectural applications. Let Texas Clear Water Systems’ custom design team assist you in exploring the possibilities for you next project, and experience the advantages of fiberglass. You can view some of Texas Clear Water Systems prior custom works in the Custom Projects section.

What about installation details and specifications?

Texas Clear Water Systems steeples and cupolas are simple and easy to install for anyone with basic construction experience. Components simply stack and bolt together (they’re pre-fit at the factory to assure ease of installation).

What is a roof pitch and how do I determine mine?

The roof pitch is the slope of your roof. You can determine yours with a level and tape measure. Click Here for more info

Can we screw an eye bolt into the top of the spire to lift it up onto the church?

The top of the spire is threaded and reinforced to hold a cross or lightning package, but it is not designed to support the entire weight of the spire. Click here to see a picture of one possible way of lifting the spire.

Can we paint the unit when it arrives?

Typically, there is no need to paint a Texas Clear Water Systems steeple. For an additional charge, we can produce your steeple in a custom color of your choice. Since our gel-coat finishes are permanently molded into the surface of the fiberglass laminate, we recommend that any special colors be ordered when ordering the steeple, rather than attempting to change the color after you’ve received it. After the steeple has been up for a few years, the constant exposure to the sun’s ultraviolet rays may dull the finish, or cause the color to fade or change. Polishing the surface with automotive compound followed by paste wax can bring back the shine and luster. If a new color is desired, the steeple can be painted in much the same way a fiberglass car body would be painted, by lightly sanding the finish and applying paint with a professional quality spray gun.

Baptistries

What colors are available for baptistries?

Baptistries come in four standard colors, blue, bone, aqua, or white. (blue and aqua are or most popular colors).

What accessories and options do we need for our baptistry?

There are three items that are generally necessary to complete a baptistry installation, a way to fill the baptistry, a way to drain the baptistry, and a way to heat the water. There are several accessories for filling and draining the baptistry ranging from simple manual fill and drain assemblies to fully automatic units. There are also different ways of heating your baptistry. Two other options available for baptistries are the window and AquaGuard finish.

Why are Texas Clear Water Systems’ “Series 2000″ Baptistries better than others?

For the first time in more than forty five years, baptistry design has taken a major step forward. The Series 2000 Baptistry Line brings many improvements over past designs, including:

  • Wider, Safer Step Design: Series 2000 is the first baptistry line in the industry with step treads and risers designed around national model building codes. The 11″ treads and 7″ risers allow for a safer, more comfortable entrance and exit from the water.
  • Improved Slip-Resistance: Series 2000 step treads incorporate a “raised circular disk” pattern widely used in commercial applications. This pattern provides a higher level of slip-resistance and offers easy cleaning.
  • Improved Efficiency: Relying on our 30+ years of experience making baptistries, we started from scratch to create designs that maximize useable space and minimize wasted space. This approach conserves water, and reduces energy costs associated with heating the water.

Free Design Service

Texas Clear Water Systems, Inc. is pleased to offer a free design service to help visualize the right architectural choice for your building. Send a photo, along with the height and width of the building. Our design engineers will create a CAD drawing of your facility with your selections of steeples imposed on the building. We will be happy to reproduce a large print, suitable for framing. It's a great way to attract donations!

Architectural Columns

Whether you need a one-story or two-story column, our columns are specifically engineered for load-bearing applications up to 35,000 pounds. They can withstand normal construction abuse and are protected against weathering, decay, insects and other environmental influences. Call Texas Clear Water Systems, Inc. today to discuss your design options!

Texas Clear Water Systems, Inc.
3423 Rollingcreek Drive
Baytown, TX 77521
Phone: 281-739-6364 Cell: 713-305-0406 Fax:281-422-8979
Email: texclear@aol.com

Site Powered By
    Houston Pro Site Builder
    Online web site design